Quote from
admin on August 15, 2024, 11:50 am
The RoboHeart can be supplied with power via the built-in USB-C port.
!!! Attention! Only use certified USB-C cables that allow a rated current of 1.2 A at 5 V.
If you connect a USB C cable to RoboHeart and the other end of the cable to your computer or another power/voltage source such as a USB power supply, the USB Pwr LED will light up green. This means that your RoboHeart is receiving power and voltage from the USB source. Please make sure that the supply circuit is closed via the SWITCH connector (see chapter switch).
The RoboHeart always acts as a consumer via USB-C, it cannot supply any connected devices with power/voltage via the USB port.
The RoboHeart can be supplied with power via the built-in USB-C port.
!!! Attention! Only use certified USB-C cables that allow a rated current of 1.2 A at 5 V.
If you connect a USB C cable to RoboHeart and the other end of the cable to your computer or another power/voltage source such as a USB power supply, the USB Pwr LED will light up green. This means that your RoboHeart is receiving power and voltage from the USB source. Please make sure that the supply circuit is closed via the SWITCH connector (see chapter switch).
The RoboHeart always acts as a consumer via USB-C, it cannot supply any connected devices with power/voltage via the USB port.
